PARTNERS

 

 

1.   VICTREX PEEK-based VICOTE thermoplastic polymer coatings can be applied using electrostatic or conventional dispersion spray techniques.

 

2.   VICOTE powder coatings can be applied by conventional electrostatic coating equipment either in manual or automatic powder booths.

 

3.   VICOTE aqueous dispersions can be applied using conventional gravity, suction or high-volume, low-pressure (HVLP) spray coating equipment.

 

4    Powders can be sprayed directly onto the substrate.

 

5.   The powder melts to form the polymer coating, which typically has a dry film thickness (DFT) of 100 – 1000 microns (4-40 mil).

 

6.   Typical applications include food processing parts, pump components, dampers, bushings, cylinder head gaskets and bearings.

 

7.   The formulated aqueous-based polymer coating is sprayed onto the substrate, which is subsequently heated to form a thin film, typically between 25 and 50 microns.

 

8.   Dispersions allow a wider range of formulation options to enhance wear and release properties.

 

9.   Typical applications include cookware, irons, engine piston rings, bearing cages and moulds.

·       High Temperature Performance

·       Exceptional wear & Abrasion Resistance

·       Very Good Chemical Resistance

·       Excellent Mechanical Properties

·       Excellent Hydrolysis Resistance

·       Eco-Friendly, FDA Compliance


  • Aerospace
  • Automotive
  • Energy
  • Consumer Goods
  • Healthcare