1.   VICTREX^® PEEK™-based VICOTE^® thermoplastic polymer coatings can be applied using electrostatic or conventional dispersion spray techniques.

2.   VICOTE^® powder coatings can be applied by conventional electrostatic coating equipment either in manual or automatic powder booths.

3.   VICOTE^® aqueous dispersions can be applied using conventional gravity, suction or high-volume, low-pressure (HVLP) spray coating equipment.

4.   Powders can be sprayed directly onto the substrate.

5.   The powder melts to form the polymer coating, which typically has a dry film thickness (DFT) of 100 – 1000 microns (4-40 mil).

6.   Typical applications include food processing parts, pump components, dampers, bushings, cylinder head gaskets and bearings.

7.   The formulated aqueous-based polymer coating is sprayed onto the substrate, which is subsequently heated to form a thin film, typically between 25 and 50 microns.

8.   Dispersions allow a wider range of formulation options to enhance wear and release properties.

9.   Typical applications include cookware, irons, engine piston rings, bearing cages and moulds.

·       High Temperature Performance

·       Exceptional wear & Abrasion Resistance

·       Very Good Chemical Resistance

·       Excellent Mechanical Properties

·       Excellent Hydrolysis Resistance

·       Eco-Friendly, FDA Compliance